This foot is ideal to sew along a plexiglass ruler. Note: When using this presser foot make sure the 2mm reduction is active in the "sewing settings - hovering height". You can also adjust the presser foot height by reducing the presser foot pressure below 0. Lower the feed dog and use without dual feed.
To use this product, make sure the most recent Firmware is installed on your machine. Visit the support section of your model to download the latest Firmware and step-by-step installation instructions. For the B77, please contact us to get your machine up-to-date.
This special presser foot serves the purpose to create professional-looking seams. It folds the fabric twice which results in a nice rolled hem which is then properly fixed by the needle with a straight stitch.
Place the fabric edge under the presser foot (wrong side up) so that it is almost flush with the inside edge of the right tow and sew 4-5 stitches. Raise the presser foot and th enedle and pull the fabric and the threads backwards (allow enough thread). Do not trim the threads. Use the left hand to hold the four threads and, with the right hand, hold the edge of the fabric as you insert it into the spiral guide of the foot. Lower the foot and continue sewing. While sewing, fold the fabric slightly and hold it to the left. Guide it evenly.
Part Number: 502020.92.95
In stock
Available for pickup at
Out of stock at
{"id":322314257,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"210000010916","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Low Shank Blind Hem Foot, Bernette","public_title":null,"options":["Default Title"],"price":495,"weight":0,"compare_at_price":495,"inventory_quantity":7,"inventory_management":"shopify","inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}
