Refill blade for Rotary Cutter-45 mm. Protective blade holder makes replacement safe and easy. Available in 1/pk or 5/pk.

Warnings

• Keep out of reach of children
• Be careful when handling the blade because it is extremely sharp

Materials

• Blade: Steel
• Protective Blade Holder: Polypropylene

Refill blade for Rotary Cutter-28 mm. Protective blade holder makes replacement safe and easy. Available in 2/pk or 5/pk

Warnings

• Keep out of reach of children
• Be careful when handling the blade because it is extremely sharp

Materials

• Blade: Steel
• Protective Blade Holder: Polypropylene

Triple Wide Wonder Clips have triple grip for a secure hold.

Comes in 6/pk or 12/pk

6/pk - 3240
12/pk - 3241

Sweet 'n Sharp Macaron allows us to always have that sharp point and smooth shaft on any needle we're using. The sharp point of a needle ensures a accurate placement in the stitch. 

Available in two colors:

Raspberry (Art. No 4130)
Pistachio (Art. No 4131)

Instructions: Place the needle on the magnetic surface without the Clover logo. To sharpen the needle, insert the needle tip and the needle shaft into the cushion

Cautions:

Do not use for any purpose than intended
Do not use this product near items that are affected by magnetism, such as sewing machines, computers, mobile phones, TVs, watches, other precision devices and magnetic cards as it may damage or malfunction
Stainless steel may not stick to the magnet
Keep out of reach of children
This product is NOT edible. In case of accidental swallowing, consult a doctor immediately

Materials:

ABS Resin
Rare-Earth Magnet 
Cushion: Cotton, Nylon with Abrasive Grain, Polyethylene 

Cuts fabric beautifully with the right amount of blade exposed, whether held upright or at an angle. Can be adjusted for left or right handed use.

Available in 4 sizes:

• 18mm (Art. No 7503)
• 28mm (Art. No 7501)
• 45mm (Art. No 7500)
• 60mm (Art. No 7502)

Blade refills sold separately.

How to Use

1. Pull the lever in the direction of the arrow to raise the cover and expose the blade for cutting
2. When closing back the blade push the lever in the direction of arrow to cover blade for greater safety

Warnings

• When cutting, be sure to place cutting mat underneath the material
• Be sure to keep the blade covered when not in use

Materials

• Handle: ABS Resin, Elastomer
• Lever, Cover: Polyacetal
• Blade, Screw: Steel

Good for marking fine lines on fabric.

Materials

• Ink: Inorganic dye, surface-active agent, water
• Body/Cap: Polypropylene

Precautions

• Avoid using this product on fabrics that cannot be washed with water
• Test on fabric before use. Fabric must be completely dry to check if the markings on the test fabric dissipated
• Markings left on more than 2 weeks may be difficult to remove
• Do not use detergent, bleach or solvent

Available in 2 sizes

• Water Erasable Marker (Fine) - Art. No 515
• Water Erasable Marker (Thick) - Art. No 516

Made from top-grade stainless steel, sharp and durable excellent for cutting fabrics. Serrated blades will prevent the fabric from sliding off the scissors while cutting, allowing a precision cut. It is most suitable for cutting multiple layers of fabrics or cutting pieces for patchworks.

Available in 4 sizes:

• Mini - Art. No 493/CW
• Small - Art. No 493/S
• Regular - Art. No 493
• Large - Art. No 493/L

Cautions

• Keep out of the reach of children
• Handle with caution because the blade tips are sharp

Materials

• Blade: Stainless Steel
• Handle: ABS Resin

Air erasable markers are great for planning sewing projects and on light and dark fabrics; giving you enough time to finalize the details. Ink provides a smooth silky ink flow. Allow the ink to disappear naturally or erase immediately using the pen eraser. 

The time it takes for markings to disappear completely differs depending on the humidity, the temperature and the amount of ink on the fabric.

Available in three sizes

• Extra Fine (Art. No. 5030)
• Thick (Art. No. 5031) 
• Fine with Eraser Pen (Art. No. 5032)

Precautions

• Avoid using this product on fabrics that cannot be washed with water
• Be sure to test the marker first on a piece of the fabric to see whether the markings are removable. Check to see whether the markings have disappeared after the test fabric has dried completely, as markings may reappear after the washed fabric has dried.
• Always remove markings before ironing fabric.
• As the ink is translucent it is not suitable for dark colored fabrics.

Materials

• Ink: Inorganic dye, surface-active agent, water
• Body, cap: Polypropylene 
• Core: Polyester
• Pen Tip: Polyacetal

Natural Fit Leather Thimbles are the first ever finger-shaped leather thimble. There are no seams or stitches where the needle hits the thimble, allowing the needle to be pushed from the most convenient spot. The unique shape creates a smooth curve from the edge of the fingertip to the middle of the finger, giving you a cozy, natural fit.

Features

• No seams or stitches allowing the needle to be pushed from any angle
• Sewn 3-dimensionally to fit the shape of your finger
• Two layers of leather for increased safety

Diameter Sizes

• Small (Art. No 6028) - 14.5mm (9/16")
• Medium (Art. No 6029) - 16 mm (5/8")
• Large (Art. No 6030) - 17.5mm (11/16")

Material: Cowhide

Water Soluble Pencil is suited for precise fine markings and can easily be wiped off with water.

How to wipe the markings off

• To wipe off with water, place a dry towel or cloth underneath your project
• Wet a cloth or towel and rub it carefully to wipe off the markings

Cautions

• Test the pencil marker with a piece of the same fabric to see if the markings can easily be erased.
• Please be aware that marking may not be washed-off if it ironed.
• If marking cannot be erased, wash the fabric with water and mild detergent. Do not dry clean.
• When sharpening use a small pencil sharpener of Clover's Pencil Sharpener.
• The Water Soluble Pencil is a non-toxic pencil.

Materials

• Core: Clay, Wax, Pigment
• Outer: Natural wood
• Cap: Polystyrene

Now you can use your fabric to make fusible bias tape. Clover's Fusible Bias Tape Maker is as easy to use as regular bias tape makers. This handy little tool is excellent for lattice and meshwork, piping, or making three-dimensional flower applique using bias tape. To use, slip the fusible web (heat adhesive tape) through the upper groove, the fabric through the base, pull through, and fuse with your mini-iron. Clover's Fusible Bias Tape Maker is available in five sizes, and they come in different colors so you won't get them confused.

The Clover Bias Tape Makers simplify creating your own uniform bias tape. These work great for binding, quilting, and more! Insert your fabric strip and pull through the end to make an even, consistent bias tape. You will find a tape strip width scale for regular or thin fabric on the back. The Clover Bias Tape Maker comes in various sizes to finish any project!

Draw fine lines with this easy-to-hold chalk pencil. When storing the Chaco-Liner, put cap on to prevent powder leakage and to keep the moisture out. Refill contains 2 per package.

Draw fine lines with this easy-to-hold chalk pencil. When storing the Chaco-Liner, put cap on to prevent powder leakage and to keep the moisture out.

Refills sold separately.

Powdered cartridge refill for Chaco Liner Pen Style. 

 Replacing the Refill Cartridge:

1.  Remove the stopper, keeping the opening upright. 
2.  Screw in the new refill cartridge into the opening of the upper unit, tilting the cartridge slowly to avoid spilling the powdered ink. 

Notes for Use

• Test on a piece of scrap fabric to be sure that the lines and marks can be erased (do not use fabrics that are not washable)
• Keep the Chaco Liner Pen Style as vertical as possible during use
• Ironing or dry cleaning may make the marks permanent
• Fasten the cap firmly to the body when not in use, to prevent spills.

Refills for Clover Pen Style Chaco Liners